Button Rock Drill Dth Hammer Bits , Carbide Disc Cutter IADC FCC / SGS / ISO

Bit manufacturers Button rock drill bits dth hammer bits DTH 10

Milled tooth(steel tooth) single cutter

Size: 6 3/4,7 1/2,8 1/2,9 7/8,12 1/4,17 1/2...

IADC: standard IADC including 111 to 837

Bearing sealed: metal sealed,rubber sealed,not sealed.

Color: blue,golden,green or as customer requirements.

Formation: soft, soft to medium hard, medium hard, hard, very hard.

Packing: wooden case.

Description:

1, Soft formations(417,437,517,537)

Features large chisel-shaped inserts to provide the highest penetration rate in the softest formations such as shales,

clays, limestone and sands.

2, Soft to medium formations(617,637)

Designed to drill effectively in formations such as hard limestone, dolomite, hard sands,

and other formations with hard cherty.

3, Medium to hard formations(737)

For extremely hard formations such as chert, granite, flint, and taconite. Features short, closely-spaced inserts to ensure maximum penetration rate and wear resistance

2. Main features:

1. Cutting Structure of this type sealed and non-sealed tci tricone bits :

The wear-resistance of teeth is enhanced with premium tungsten carbide hard facing on the tooth

surfaces for steel tooth bit.

2. Gauge Structure of this type tci tricone rock bits:

Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge

surface of the cone, tungsten carbide inserts and hard facing on the shirttail increases gauge

holding capability and bearing life.

3. Bearing Structure of this type tci tricone rock bits :

High precision roller bearing with two thrust faces. Ball locks the cone. Thrust faces hard face

with wear resistant alloy. Abrasion resistance and seizure resistance of the bearing are improved.